FIEDLER > Units for control and telemetry > Control units > External input/output modules for control units > AIM600, AIM615 – 4-20 mA/RS485 Converters
AIM600, AIM615 – 4-20 mA/RS485 Converters
External input/output modules for control units

AIM600, AIM615 – 4-20 mA/RS485 Converters

The AIM600 and AIM615 transducers are characterized primarily by high measurement accuracy provided by the 24-bit converter, as well as low quiescent current consumption, a supply voltage suitable for operation from a 12 V battery, galvanic isolation of the inputs from both the supply voltage and the RS485 communication line, and, last but not least, high operational reliability without any mechanical adjustment elements.

  • 6 inputs galvanically isolated from both the power supply and the RS485 serial bus
  • Measurement channels with ranges of 0–20 mA or 4–20 mA, with conversion to 0–100% of the measured value for each input
  • High-precision 24-bit converter
  • Error detection for current measurements above 20.75 mA and below 3.75 mA (for 4–20 mA ranges)
  • Modbus RTU or FINET protocols and a configurable address for connecting multiple AIM6xx modules into a single system
  • Low current consumption, suitable even for battery-powered applications
  • Overvoltage protection for both inputs and outputs
  • Compatible with FIEDLER AMS telemetry stations
Non-binding inquiry

Description

The measurement modules are used to convert up to 6 current signals (0–20 mA or 4–20 mA) to an RS485 data output using the Finet or Modbus RTU protocol.
The AIM615 module includes a galvanically isolated 15 V DC power supply (UISO) designed to power connected measurement sensors and transducers.
The AIM600 module allows only the connection of active current signals powered by a separate voltage source.

Applications

  • Expanding the number of analog inputs on measuring stations and telemetry stations
  • Connecting an analog signal to a fiber-optic line or radio network
  • Adding the required number of analog inputs to simple PLCs and control units

Technical specifications

Technical Specifications AIM600 AIM615
Inputs IN1 to IN6, measurement range 4(0) – 20 mA IN1 to IN6, measurement range 4(0) – 20 mA
Measurement error < ±0.05% of range, high-precision 24-bit converter < ±0.05% of range, high-precision 24-bit converter
Measurement time < 0.3 s per measurement channel < 0.3 s per measurement channel
Input resistance 50 Ω 50 Ω
RS485 Output Channels K1 through K6 via RS485 using the FINET (MODBUS RTU) protocol Channels K1 through K6 via RS485 using the FINET (MODBUS RTU) protocol
Communication address 60 + on-board switch (0 to 15) 60 + on-board switch (0 to 15)
Measurement range 0 to 100% [-] of the 0(4)-20 mA range, float format (10000=100%) 0 to 100% [-] of the 0(4)-20 mA range, float format (10000=100%)
Supply voltage 6 to 26 V DC / I < 15 mA 11 to 13 V DC / I < 180 mA
UISO output - 15 VDC / 1000 V galvanic isolation
Temperature range -25 °C to +60 °C -25 °C to +60 °C
Dimensions/IP 109 x 23 x 57 mm / IP 20 (width: 1 module/DIN rail) 109 x 23 x 57 mm / IP 20 (1 module wide / DIN rail)

Downloads

Price List Manual H7 119 0 Cenik 2026 V101

Related products

GX200 - Current Loop Galvanic Isolation Module

GX200 - Current Loop Galvanic Isolation Module

A galvanic isolation module for 0–20 mA and 4–20 mA current signals that does not require an external power supply, designed for two-wire transducers.

View
OPTO3 - Pulse Signal Splitter

OPTO3 - Pulse Signal Splitter

The OPTO3 galvanically isolated pulse splitter has one pulse input for connecting a signal from a water meter or electric meter sensor and three mutually galvanically isolated pulse outputs.

View
DV2 - Binary Input and Output Module

DV2 - Binary Input and Output Module

The DV2 external input/output module expands the number of binary inputs and relay outputs. Up to two DV2 I/O units can be connected to the H3 station via the RS485 interface. Up to 10 DV2 modules can be connected to the H3 and H7 series units.

View
B3OK – ISCO Converter

B3OK – ISCO Converter

The B3OK converts the three binary outputs of ISCO devices to inputs for FIEDLER telemetry units (H1, H3, and others). It enables simple and secure connection of ISCO devices to data logging and control systems without the need for additional modules.

View

Non-binding inquiry

AIM600, AIM615 – 4-20 mA/RS485 Converters



    Contact

    Have a project or a question?

    Free consultation - our specialists will help you choose the right solution for your project.